Cold Cosmetic Joint  Filler   COJF -C 9

Description:                                                                        

JF–2 is a plasto-elastic single component material based on modified emulsion resin. Produced in different colors to match every substrat, it gives a monotonous look to all facades. It is highly resistant in all weather conditions and keeps its elastic form in hot and cold temperature. Due to its anti fungal characteristics it also prevents the growth of alga and fungus.

 
Uses:

JF – 2 is used as a joint filler in:

-         Joints between concrete slabs

-         All joints in facades

-         Joints between wall and windows and doors

Advantages:

-         Ready and easy to use

-         Weathering and water resistance

-         Fast curing

-         Good adhesion

Surface Preparation:

All surfaces must be completely sound and thoroughly clean. Remove all loose particles, laitance, dirt, paint, etc.Clean all traces of oil and grease by suitable degreasing agent.

Application:

COJF -C 9 can easily be put inside the joint by hand and pointer. If in cold weather it became hard, put it in a 30°C - 40°C water bath to get a smooth plastic consistency.

NOTE: Never use direct heat.

Technical Data:

Type:                           Solid

Color:                         Different colors

Sp.gr.:                         1.2 kg/lit

Shelf life:     One year when unopened      

Storage Condition:  Away from extreme heat  

Standard:                    ASTM- D 1190

Flow:                                     Non

Bond:                                   Good

Packaging:              5& 12kg drums