|
PU Flooring
PU -MX
Description:
PU -MX is a two component
polymer based on polyurethane with excellent gloss and color variety. Its
excellent characteristic in many cases is similar to those of PVC
and each millimeter thickness of PU -MX flooring is completely
resistant to high voltage electricity, abrasion and many chemicals.
Uses:
-
Coating of old and new concrete surface.
-
Industrial, commercial and public service flooring.
-
Laboratories, food, medicine and chemical
industries flooring
Advantages:
PU -MX Provides the following properties:
-
Resistance to abrasion, high voltage electricity,
chemicals and fire.
-
Beautiful, smooth and flat floor without any
expansion joints.
-
Hygiene and dustproof in different colors
Surface
Preparation:
The surface must be clean, dry and free from any
contamination like oil and grease.
Mixing Ratio:
PU -MX:3 parts by volume
Hardener:1 part by volume
Application:
Use air less spray or brush to coat the floor
with PU -MX.As the pot life is too short (about 30 min.), only
suitable amount that can be used within this time should be prepared.
PU -MX can be diluted by MEK, thinner 404 or
10000 depending on temperature.Maximum addition of thinner is 15% volume
of PU -MX.
Hint:
- Recoating interval is:
Min: 16 hours
(at 20°C)
Max: 3
days (at 20°C)
- Do not apply under sunshine
- In confined spaces
provide adequate ventilation during application and drying.
Technical
Data:
Type: Viscose
Liquid
Color:
Green
Sp, Gr.:
1.3 kg/ lit
Solid Content:
55%
Flash Pint:
45°C
Dry To Touch: 8
hours
Fully Cured:
7 days
Shelf Life: 2 years when unopened
Storage Condition: Below 30°C
Packaging: l0 kg drums
|