Extra Quick Setting   ES -50P

Description:

A liquid form admixture that when added to cement, sets it in 30 to 45 seconds at 20 ˚C.

ES -50P is very sensitive to temperature changes.

Uses:

ES -50P is used to seal severe water infiltration in concrete, rock and masonry.

Advantages:

-         Moves sever water leakage out of  working  zone

-         Dries the surface for new coverings

-         Controls under ground water level

Mixing Ratio:

Mix one volume of ES -50P with two volumes of fresh cement and use it immediately.

Surface Preparation:

The surface must be clean, free from oil, grease, laitance, and any loose particles.

Application:

As the setting time is too short, make small amount each time as bellow:

Place ES -50P in a rubber bowl, add fresh cement, form the paste by hand and place it immediately in the hole and press it firmly until it gets hard.

     Health And Safety:

-         Wear rubber gloves and goggle at all times.

-         Apply barrier cream to arms.

-         If splashing to the eyes occurs, rinse immediately and thoroughly with clean water or boric acid solution.  

     Technical Data:

     Type:                                            Liquid

     Color:                                               Red 

     Sp.Gr.:                                1.25  kg./lit.

     Shelf Life:         2 years when unopened   

     Storage Condition:         Free from frost

     Packaging:            25 and 300 kg drums